Super King Pins

Grinding Pins

Overview

Matrix Versions: Dry or Wet

Pilot has developed specific matrices to give consistent self-sharpening properties for either air or water flushed grinding processes.

Waterways:

Available in 5 distinct waterway configurations; Single, Modified Single, Three, Three Waterway and Twin Turbo.

Crown Profiles:

Pilot pins are available in several profiles to correspond with the geometry of the new button: hemispherical, ballistic, parabolic and conical. The standard sizes for the crown profiles range from 6MM to 25MM (depending on the waterway style).

Other Shaft Styles:

Drive arrangements are standardized to suit most common grinding machines;

  • Wing (shoulder) drive with one ‘O’ ring
  • Ausroc
  • Atlas Copco Terroc 55
  • Sandvik Sancone A
  • Plain Shaft

Available In All Standard Sizes

Waterways

Various waterway configurations are available: standard (single waterway), three waterway which is better suited to provide adequate flushing to the larger sizes and twin waterway to eliminate the “nipple effect” where an uncut nib is left in the centre of the button. This effect if not corrected, can result in cracking of the button due to severe concentrated loads when placed back in service. Modified single and three waterway versions are also available to effectively address the “nipple effect”.

Single

  • Available in all shaft configurations
  • Available in all crown profiles
  • Crown Profile Sizes 6MM to 13MM

Three

  • Available in all shaft configurations
  • Available in all crown profiles
  • Crown Profile Sizes 6MM to 13MM

Twin Turbo

  • Available in all shaft configurations
  • Available in all crown profiles
  • Crown Profile Sizes 6MM to 13MM

Crown Profiles

All profiles are the combination type, where the button and surrounding steel body are cut simultaneously to provide the most effective refurbishment of the bit in a single step.

Round (Hemispherical)

Parabolic (Semi Ballistic)

Conical (Cone or Spike)

Ballistic (Full Ballistic)

Downloads

Request a Quote

To Request A Quote, enter a quantity and click the add to quote button. You will then be directed to your "My Quote" page. On that page you can either submit the RFQ or continue to add more product.

Add Items to Cart

Contact a Sales Rep

Can't find what your looking for or need something custom? Pilot's technicians have seen most problems before and can either recall a similar case along with its custom solution or even design a new tool in cooperation with the driller.

  • Phone: 1-705-497-3715
  • Toll Free: 1-877-480-7415
  • Fax: 1-705-497-3714
  • Email: [email protected]

Overview

Details

Matrix Versions: Dry or Wet

Pilot has developed specific matrices to give consistent self-sharpening properties for either air or water flushed grinding processes.

Waterways:

Available in 5 distinct waterway configurations; Single, Modified Single, Three, Three Waterway and Twin Turbo.

Crown Profiles:

Pilot pins are available in several profiles to correspond with the geometry of the new button: hemispherical, ballistic, parabolic and conical. The standard sizes for the crown profiles range from 6MM to 25MM (depending on the waterway style).

Other Shaft Styles:

Drive arrangements are standardized to suit most common grinding machines;

  • Wing (shoulder) drive with one ‘O’ ring
  • Ausroc
  • Atlas Copco Terroc 55
  • Sandvik Sancone A
  • Plain Shaft

Available In All Standard Sizes

Waterways

Details

Various waterway configurations are available: standard (single waterway), three waterway which is better suited to provide adequate flushing to the larger sizes and twin waterway to eliminate the “nipple effect” where an uncut nib is left in the centre of the button. This effect if not corrected, can result in cracking of the button due to severe concentrated loads when placed back in service. Modified single and three waterway versions are also available to effectively address the “nipple effect”.

Single

  • Available in all shaft configurations
  • Available in all crown profiles
  • Crown Profile Sizes 6MM to 13MM

Three

  • Available in all shaft configurations
  • Available in all crown profiles
  • Crown Profile Sizes 6MM to 13MM

Twin Turbo

  • Available in all shaft configurations
  • Available in all crown profiles
  • Crown Profile Sizes 6MM to 13MM

Crown Profiles

Details

All profiles are the combination type, where the button and surrounding steel body are cut simultaneously to provide the most effective refurbishment of the bit in a single step.

Round (Hemispherical)

Parabolic (Semi Ballistic)

Conical (Cone or Spike)

Ballistic (Full Ballistic)

You may also be interested in the following product(s)