Introducing the Pilot Impregnated Bit Series

13-12-13 2:32 PM

Until now, Pilot has been recognized mainly as the premier source of high quality diamond set tools for the exploration industry. Pilot's attention to detail, craftsmanship and understanding of the industry has now been united with state of the art powder metallurgy practice in the creation of a new range of impregnated bits.

Careful selection and blending of synthetic diamonds provides the foundation for the Pilot impregnated range. Metallic materials matched to the purpose, carefully developed processes and stringent quality controls round out the product.

By considering the drillability of the rock rather than concentrating only on hardness, we have judged the combined effects of abrasiveness, friability and hardness to develop a series of five products to meet the challenge of any formation.

Fractured Abrasive

Each member of the Pilot impregnated series has a broad range of application, predictable response and a tolerance of changing conditions which results in higher productivity, fewer bit changes and more core in the box at the end of the shift.

Series 100

Designed for Soft and Abrasive Formations
Rock Formation Examples: Talc, Hard Shales, Limestone, Sandstone, Schist, Dolomite, and Serpentinite.

Series 200

Designed for Soft to Medium Formations
Rock Formation Examples: Schist, Dolomite, Serpentinite, Basalt Diorite, and Dolerite.

Series 300

Designed for Medium to Hard Formations
Rock Formation Examples: Basalt, Diorite, Dolerite, Gabbro, Quartz, Pegmatite, Granite, Gneiss, Quartzite, Andesite.

Series 400

Designed For Hard to Very Hard Formations
Rock Formation Examples: Granite, Gneiss, Quartzite, Andesite, Glassy, Rhyolite, and Porphyry.

Series 500

Designed for Very Hard to Ultra Hard Formations
Rock Formation Examples: Glassy, Quartzite, Rhyolite, Porphyry, Granite, Jasperite, Chert, and Ironstone.

Impregnated Bit Crown Profiles

Pilot offers three standard impregnated crown profiles which will cover any commonly found ground condition. All share a face design that has been developed to provide reinforcement where it is most needed, while minimizing the risk of unwanted deviation.

Standard crown

The waterway design and number of segments on the standard profile have been selected to provide a robust yet productive tool which can take on variable formations without seriously affecting performance. It is the default choice when facing the unexpected.


The Pilot Turbo crown has been developed by paying close attention to the hydraulic effects that take place around the water courses, especially at the higher peripheral speeds that can be expected when the user seeks maximum penetration rate. The result is a tool that stays effectively flushed and cooled, even when driven beyond the normally accepted parameters for wireline bits. Productivity can only be truly maximized when the simple effect of pushing up the penetration rate is balanced by efficient flushing to prevent uneven wear and premature failure.

Face Discharge crown

For use in unconsolidated formations, where there is a chance that fluid can be lost in the formation without performing vital flushing, it is usual to select a face discharge bit. Pilot has taken a different approach from conventional face discharge design, optimising the chance of adequately clearing the cuttings while minimizing the chance of washing away the more fragile core.

For more info and to request a quote for an Impregnated Bit, please follow this link to the Impregnated Bit product page.

14-04-09 10:50 am News and Events

The New Pilot hard metal sprayed locking Coupling

Read more

13-12-13 2:32 pm News and Events

Introducing the Pilot impregnated bit series

Read more

13-09-04 1:28 pm News and Events

Pilot Welcomes New Members to the Team - June 2013

Read more